Introduction to common materials of office furniture

1. Solid wood board
1) Solid wood panels currently use solid wood panels for floors and door leaves, but solid wood panels are generally not used, and solid wood panels are wood panels made of intact wood. These boards are durable and have natural textures, making them the best choice for decoration. However, due to the high cost of such panels and the high requirements for construction technology, if the level of the constructor is not enough, it will often cause a series of problems, such as arching, deformation and so on. It is not used much in decoration. Solid wood boards are generally classified according to the actual name of the board, and there is no unified standard specification.

2) Solid wood jigsaw: semi-manual production. The method is to take the wood from the solid wood and use glue to splice the artificial board by teeth or straight. This kind of board is also used in most rubber wood construction templates. Solid wood board, but generally made of mixed wood.

Commonly used solid wood furniture woods are Fraxinus mandshurica, Northeast elm, Meranoga, camphor, basswood, birch, color wood, teak, beech, cherry wood, red sandalwood, cypress, yew, red pine, oak wood, yellow pineapple, Walnut, Schima superba, rosewood, redwood, neem, Chinese toon, wild jujube, etc. Common man-made boards for panel furniture include plywood, blockboard, particle board, and MDF.

2. Artificial board
1) Composite wood flooring, also called laminate wood flooring, because some companies often name themselves some names for different purposes, such as super-strong wood flooring, diamond-shaped wood flooring, and so on. The disadvantage of composite floor is that when laying a large area, there will be the phenomenon of overall arching and deformation. Because it is a composite, the corners between the plates are easily broken or worn.

2) Splint
Plywood, also known as plywood, is commonly known as thin core board in the industry. It is formed by hot pressing of three or more layers of one millimeter thick veneer or sheet glue. It is currently the most commonly used material for handmade furniture.

3) Decorative panel
Decorative panels, commonly known as panels. It is a decorative board with single-sided decoration made by precision slicing of solid wood board into a thin veneer with a thickness of about 0.2mm.

4) Blockboard
Blockboard and plywood: Blockboard is also called big core board, which is made of solid wood and laminated with a layer of veneer on the top and bottom. It is often used as a load-bearing material in decoration. In fact, it is also a kind of plywood. , The standard thickness is generally 16 mm plywood, which is made of pure veneer layer by layer.

5) Particleboard
Particleboard is a thin board made of wood scraps as the main raw material, and then infiltrated with glue and additives. The pressing method can be divided into two types: extruded particle board and flat pressed particle board.

6) Density board
Density board, also called fiberboard. It is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. MDF is also easy to reprocess due to its softness and impact resistance.

7) Fireproof board
Fireproof board is a decorative board made of silicon or calcium materials as main raw materials, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives, and made by autoclave technology.

8) Melamine board
Melamine board, full name is melamine impregnated adhesive film paper veneer artificial board. It is a decorative board made of paper with different colors or textures soaked in a melamine resin adhesive, then dried to a certain degree of curing, and then spread on the surface of particleboard, density fiberboard or hard fiberboard, and then formed by hot pressing. Melamine board is a wall decoration material.

3. Metal
Metal office furniture is very common in major office furniture companies. Most of this type of furniture is used in some relatively public places, such as hospital waiting rooms, company reception rooms, etc. Due to material reasons, the price is relatively low , And very durable.

As a professional furniture manufacturer, we can customize any material of furniture for customers. Please kindly send us an email for getting more customized material information.